Electromagnetic Flow Meter
The Smart Electromagnetic Flowmeter Is Of Perfect Performance And Reliability. Based On the Successfully
Proven Smart Flow Technology of ITECHFLOW the flowmeter is widely used in industries of petroleum, chemical
engineering, iron and steel, food electric power, paper making, water treatment, petro chemistry& medicine etc.
PERFORMANCE SPECIFICATIONS
Model : Lafuma_ITF_EMF_0.5%
Size: DN10~DN3000mm
Nominal Pressure: 0.6~4.0MPa
Accuracy: + 0.5% of the value displayed, +0.3% or +0.2% are
optional
Liner Material: Teflon, PFA, F46, Neoprene, Polyurethane.
Electrode Type: General type, Scraper type and Replaceable
type.
Electrode Material: SS316, Hastelloy B, Hastelloy C, Titanium,
Tantalum, Platinum-iridium, stainless steel covered with
tungsten.
Medium Temperature Integral type: 100C~
+800C
Remote Type: Neoprene & Polyurethane Liner --- 100C +800C
PTFE, PFA, F46 Liner 100C +1600C
Ambient Temperature: 250C+600C
Ambient Humidity: 5~100% RH (relative humidity)
Medium Electrical conductivity: > 5.0 s/cm
Measuring Range: 1500:1, flowrate < 15m/s
Structure Type: Integral type, remote type, submersible type,
ex proof type.
Protection Class: IP65, IP68 (optional), IP65 Dustproof and
Watertight: IP68 Dustproof and submersible for long (only for
remote type)
Out put signal: 4-20mA, Puls , RS 485 MODBUS SYSTEM
SELECTION PRINCIPALS
The measured liquid must be conductivity liquid of
serosity of which the conductivity should be more than
50 s/cm the medium should not contain much magnetic
matter of air bubbles.
Pressure grade lining material, electrode material and
structure type should be selected according to the
medium's temperature corrosiveness, abrasion, etc.
Normally the sized of flow meter should be the same as
the pipe diameter.
